10 Things Everyone Hates About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they don't corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will reduce unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge amount of damage to your home, making it very hazardous and possibly fatal. You should take the time to ensure that your windows are in good working order.

For single pane windows it is fairly easy to replace them, and the new window will usually fit inside the old frame very easily. If you have double-paned windows that are held together by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this instance it is essential to buy plastic spacers to make sure that the new pane fits into the window frame.

If you are going to try to remove the glass panes yourself it is crucial to wear the proper safety gear such as gloves that are thick and protective eyewear. It is also a good idea to lay down a dropcloth before you start working on the glass so that any shards fall onto the fabric instead of onto the floor where they can be trampled upon and cause further damage.

After the glass has been removed from the window, it's best to seal the gap with packaging tape or duct tape to prevent water and drafts from entering the property until a professional comes out and repair the window. It also acts as a barrier, deterring any intruders from gaining entry to your home. If the gap is large, you may be interested in the security door with an integrated window, as it will provide the best of both worlds.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash window. Over time, they can be affected by a variety of issues such as sliding. A sagging window in uPVC can cause problems with light, draughts and even security. It's important to take action immediately if you notice your uPVC windows are sagging.

Repositioning the hinges could help fix a window that is sliding. You'll first need to open the windows to get at the frame. Then, using a screwdriver, you can take off the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you've repositioned your hinges. If you're satisfied with the fit of your window, you can tighten screws to hold them in place.

If you are unable to reposition the hinges, you might have to replace the seal. As time passes, rubber seals lose their elasticity and dry out which causes them to loosen. If this happens, it's important to replace the seal as fast as you can to ensure that your uPVC windows are watertight and safe from drafts.

uPVC handles can also loosen up. This is typically caused by screws that have loosened over time, but it could also be due to the mechanism of the handle wears out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. First, you'll need to close the window and then perform an initial test fit. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn't then you can use a screwdriver or a wrench to loosen the handle, and then reverse the mechanism back into its original position.

3. Water Leaks

It is crucial to take action if get up each morning to find a smoky wall and floors that are wet. The leaks of water through windows could cause structural damage to your home and also affect your ability to regulate the temperature of your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a simple fix that can be completed by anyone who is a DIYer with the skills. Depending on the severity of the issue the caulking that was used up might need to be removed before a new layer of caulk can be applied. It is important to keep in mind that when it is about uPVC window repairs, you should not be tempted to apply too much caulk' as this will only make the area harder to clean and could decrease the efficiency of your energy usage.

It is crucial to make sure that any drainage holes are free of debris and that the sill pan has been angled correctly so that it drains away from the window. In more extreme cases, you may need to replace the window.

Other indicators of water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives under humid conditions and can propagate quickly throughout the house.

It is also important to keep in mind that if the leakage originates from the glass in your double glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sliding. This can be easily fixed by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and blow open with a breeze It could be hinges at the fault. They can be repaired by any DIYer who is skilled and can be done within a few minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that use hinges and, like all mechanical parts, they can wear down over time. The process of replacing a hinge on a window is an easy process, but it's simpler if you have someone to assist in holding the frame up.

It is also important to ensure that the uPVC hinges are opened and closed in the correct direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The problem with the hinges on windows could be caused by improperly opening the window in a particular manner or because of improper installation in the factory. Sending us a picture via our website is often enough to resolve the problem. We are always happy to provide assistance.

Regular lubrication of the hinges is also necessary. This can be accomplished by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window to open and close more easily. It can also stop corrosion and reduce the risk of sticking. The ideal time to do this at least once a year. WD40 and other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by different factors. First, the hinges because of wear and tear, could become misaligned. This will cause a gap to form where the sash meets the frame. If they're beyond repair, it could be necessary to get them re-aligned. Secondly the interlock, this is located on the hinge of the window and can also be misaligned, and again it's feasible to give them a good clean, but in some cases it might be necessary to have these replaced.

The second most frequent reason for draughts is window seals. They are susceptible to being worn out or damaged over time, and allow air to escape through the gaps. Replacing these with high-quality weatherstripping is a good way to stop draughts. Another option is to replace the window with glass that is low-emissivity, this will help in regulating indoor temperatures, and also reduce the risk of draughts.

One of the most effective methods to reduce the draughts in your home is to use an draught excluder. These are usually fabric tubes which are filled with a type of filler. They can be put on the top of your windowsill. They can keep your home warm by blocking out cold air.

Your upvc windows can keep providing excellent insulation and security to your home by performing regular maintenance and repairs. It is crucial to keep in mind that all windows eventually wear out and it may be cheaper to replace them than to repair them. If you have any problems with your upvc window repairs near me window it is recommended to speak with a professional as soon as you can.