Repairs To Upvc Windows: It's Not As Difficult As You Think

Repairs to uPVC Windows

uPVC is a great option for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they do not corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will reduce unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home and even be fatal. It is essential to ensure that your windows are in good condition.

For single pane windows, it can be relatively simple to replace them, and the replacement will usually fit inside the frame of the previous one easily. However when windows with double panes are anchored by internal beading it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this case, it is necessary to purchase plastic spacers to aid in fitting the new pane into the window frame.

Wearing eye protection and thick gloves is a must when you are planning to remove the glass by yourself. You should also lay down a dropcloth before you begin working on the window panes so that any shards of glass fall onto the fabric and not on the floor which could cause them to be trampled.

After the glass has been removed from the window, it's best to cover the gap with packaging tape or duct tape to stop drafts and water from entering the property until a professional can come out and repair the window. It also acts as a barrier to prevent any criminals from getting into your home. If the distance between the window and the door is large, you might need to consider an alarm system that has a window. This will provide the best of both.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows made of sash. However, over time they may be afflicted by a variety of issues like sliding. A window that isn't properly aligned can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to lose its shape, it's crucial to act fast to stop the issue from worsening.

Repositioning the hinges can aid in fixing a window which is sagging. First, you'll need to unblock the windows so you can get at the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, close your window and check for fit. If you are happy with the fit of the window, tighten the screws to hold them in place.

If you cannot reposition the hinges, you could have to replace the seal. Over time, rubber seals lose their elasticity and become dry, which causes them to loosen. If this happens, it's crucial to replace the seal as soon as you can to ensure that your uPVC windows are waterproof and secure from draughts.

uPVC handles can also become loose. Most often it is due to screws that have come loose over time. However, it can be due to the fact that the handle mechanism has been worn out. It's relatively easy to repair a loose uPVC handle. First, you'll need to close the window and then perform an initial fitting. The joint at the corner of the sash should be aligned with the joint on the casing. If it does not, you can use the screwdriver to loosen the handle. Then, turn the mechanism into position.

3. Water Leaks

It is essential to take action if get up each morning to find a smoky wall and wet floors. The leaks of water through windows could cause structural damage to your home and also impact your ability to regulate the temperature inside your home. The most common cause for leaking uPVC windows is that the sealant around the frame is either damaged or is missing.

This is a fairly simple fix that can be done by any competent DIYer. Depending on the severity of the problem the caulking used previously might need to be removed before a fresh layer is applied. It is important to remember that when it is about Upvc window Repair window repairs you should not be tempted to apply too much caulk in order to make the area more difficult to clean and could reduce your energy efficiency.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious situations, you may need to think about replacing the window.

Mold spots and rotten sills are also signs of water leakage. The is a fungus that thrives in damp conditions and can quickly spread across the house.

If the leakage occurs between the double-glazed glass, it is more likely the issue is with the seal than the frame. It is also possible to be corrected by a upvc window repair near me window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open or it blows open with a breeze. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Most households in the UK will have either top hung or side hung uPVC windows that use hinges and like any mechanical part they will wear out over time. The process of replacing a hinge on a window is an easy process, but it's simpler if you have someone to help you hold the frame in place.

It is also important to verify that the uPVC hinges are opened and closed in the correct direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

The problem can be caused either by opening the window incorrectly or by a poor installation at the factory. This issue can be fixed by sending us a photo on our website. We will be happy to give you suggestions.

Regular lubrication of the hinges is also necessary. Applying a light engineering lubricant to the hinges is a good way to do this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to operate and close more easily. It can also stop corrosion and reduce the risk of sticking. This should be done at least every year. WD40 and other solvent-based lubricants are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by different things. The hinges can also be misaligned due to wear, creating an opening between the frame and sash. These can be easily repaired by giving them good cleaning, but in the event that they are beyond repair it might be necessary to have them realigned or replaced. The second is the interlock, which is located on the hinge side of the window, may be misaligned. Again, it is possible to give them a thorough clean, however in some cases it might be necessary to get them replaced.

These seals can wear down or be damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity lenses. This will help control indoor temperatures and lessen draughts.

Lastly, one of the most effective ways to cut down on the draughts in your home is to use an draught excluder. These are typically made of fabric filled with some type of filler. They can be placed on the top of your windowsill. They will keep your home warm by blocking cold air.

Your windows made of upvc will keep providing excellent insulation and security in your home by performing regular maintenance and repairs. It is essential to remember that all windows eventually get worn out and it could be cheaper to replace them instead of fixing them. So, if you're experiencing problems with your upvc windows, it is best to seek professional assistance as soon as possible.